Motherboard debug post codes

Some PC users using an ASUS motherboard are seeing the 00 Q error code on their motherboard whenever they attempt khổng lồ boot up their computer. Some users encountering this problem are reporting that whenever this error occurs, no signal shows up on the screen.

You watching: Motherboard debug post codes

*
Q-Code 00 Error on ASUS Motherboard

As it turns out, there are several different causes that might be causing this error code. To make things easier for you, we made a các mục with all the potential culprit:


Corrupted data is perpetuated by CMOS battery – Under certain circumstances, you can expect khổng lồ see this error code if your CMOS battery is ‘remembering’ corrupted boot data in between restarts. To fix this problem, you need to take out the CMOS battery in order to drain the power capacitors of your motherboard.BIOS or UEFI data is causing instability – As it turns out, there are certain BIOS or UEFI settings that might cause this type of motherboard error. Sometimes this can be resolved by resetting your BIOS or UEFI setting bachồng to lớn their factory defaults.RAM inconsistency – According khổng lồ some affected users, this problem can sometimes be caused by your RAM sticks if you’re using a dual-channel thiết đặt. If this scenario is applicable, swapping the slots in which the 2 sticks are inserted might fix the issue in your case.

Method 1: Resetting the CMOS Battery (if applicable)

As it turns out, one of the most comtháng reasons that might be causing the 00 Q error code is an inconsistency that’s perpetuated by the CMOS (Complementary Metal-Oxide Semiconductor) battery. In most cases, this particular ASUS Q error is caused by some type of corrupted data that’s preserved in-between startups & needs to be cleared.

If this scenario looks like it could be applicable, you can fix the problem by opening your PC case and temporarily removing the CMOS battery in order to clear any information that might be causing this error at every startup attempt.

In case you don’t know how to lớn clear the CMOS battery by yourself, follow the instructions below for step by step instructions:

Note: The instructions below are mostly applicable lớn desktop PCs. Although it’s possible to lớn remove the CMOS battery on your máy tính, this most likely involves breaking apart the whole thing which is considerably more complicated than just removing the case.

Start by turning your computer và unplug it from the power source it’s currently connected lớn.Next, remove sầu the side case on your PC a equip yourself with a static wristband before touching any of the internals.Note: A wristband is optional but recommended since it will ground you to the frame và eliminate the risks of causing shorts due to static electriđô thị by evening out the electrical energy propagated throughout your PC components.Once you’ve sầu made sure that you’re using the proper safety precautions, take a look at your ASUS motherboard and locate your CMOS battery. It’s easy to lớn recognize as it’s basically the same kind of battery you’ll find on analog watches.When you see it, use your fingernail or a non-conductive object khổng lồ remove sầu it from the slot.
*
Removing the CMOS batteryOnce you manage to remove the battery, wait for 10 seconds or more khổng lồ give sầu your motherboard enough time lớn drain the power capacitors and ‘forget’ the information that was previously stored by the CMOS battery.Next, reinsert the CMOS battery baông xã into its slot and put the side cover baông chồng before plugging your computer baông xã inlớn a power source.Boot your computer normally và see if the problem is now fixed.

In case the same problem is still occurring, move sầu down lớn the next potential fix below.

Method 2: Resetting BIOS / UEFI Settings (if applicable)

If removing the CMOS battery didn’t fix the problem and you have access lớn your BIOS or UEFI, you might be able to fix the problem by resetting your UEFI (Unified Extensible Firmware Interface) or BIOS (Basic Input / đầu ra System) settings.

If this problem is indeed related lớn a UEFI or BIOS setting, resetting everything bachồng lớn their default values will fix the issue (as confirmed by a lot of affected users).

IMPORTANT: You can only follow the instructions below if you get a signal to lớn your monitor và you are able khổng lồ access your BIOS or UEFI settings.

See more: Trang Nhập Code Mobile Legends Bang Bang Vng, Cách Nhập Giftcode


But keep in mind that depending on the low-level type of software that you’re using, the instructions for resetting those settings will be different. To treat both potential scenarquả táo, follow one of the sub-guides below:

A. Resetting the UEFI Settings khổng lồ Factory

If you can’t boot up at all, you can force your PC to lớn boot inkhổng lồ the Recovery menu by forcing 3 consecutive startups interruptions – Do so by turning off your PC while it’s booting up.Once you’re inside the Recovery menu, go to Troubleshoot > Advanced, then cliông xã on UEFI Firmware Settings.
*
Accessing the UEFI firmware settingsNext, cliông chồng on the Restart button to lớn confirm your choice và wait until your computer will restart directly into lớn the UEFI menu.
*
Restarting the computer directly into the UEFI SetupAfter your computer boots directly into lớn the UEFI settings, look around the settings, và look for the Restore / Reset tab & look for the Restore Defaults option.
*
Restore UEFI settings to the defaults

Note: Depending on your UEFI version và motherboard manufacturer, the exact names of these menus will be different.At the confirmation prompt, confirm the factory rephối và restart your computer conventionally khổng lồ see if the problem is fixed.

B. Resetting BIOS Settings to Factory

Power up your PC & start repeatedly pressing the Boot key (Setup key) immediately after you see the first screen. This should eventually take you directly inlớn your BIOS screen.Note: In most cases, the Boot (Setup Key) is one of the following keys: Del key (Dell Computers), the Esc key, or one of the F keys (F1, F2, F4, F8, F12).Once you’re inside your BIOS settings, look for the menu named Setup Default or Remix to Default or Factory Default. Next, access the Load Setup Defaults option to refer baông chồng to lớn their mặc định values.
*
Load mặc định system configurationSave sầu the changes, then restart your computer conventionally and see if the problem is now fixed.In case the same problem is still not resolved, move down lớn the next potential fix below.

Method 3: Swapping your RAM Sticks

As it turns out, some affected users have sầu managed khổng lồ fix the problem simply by swapping up their RAM sticks with each other before booting the computer again.

This method was confirmed to be effective sầu for a lot of affected users – All they did was they powered off their computer và opened the PC case lớn change the slots in which their dual channel RAM sticks were inserted.

*
Swapping your RAM sticks

Once you swap the RAM sticks slots, boot your computer normally & see if the problem is now resolved.

If the same problem is still occurring, move sầu down to the next potential fix below.

Method 4: Removing Overclocked Frequencies

If you’re currently overclocking your the frequencies and/or voltages of your RAM, CPU, or GPU, that might be the main cause of this error code. Most likely, you’re seeing this motherboard error code due to lớn general system instability.

See more: Html Sub Code Records Music, : The Subscript Element

In case this scenario looks lượt thích it could be applicable & you’re seeing this error after overclocking certain components on your PC configuration, go ahead và revert baông xã khổng lồ the default values before booting up again & see if the problem is fixed.


Chuyên mục: giftcode