Fix windows 10 error code 0x80070035 the network path was not found

Windows allows users to lớn share files between systems which are on the same network, even if they aren’t physically connected. The folder administrator needs to allow access khổng lồ the intended user & the Internet should be connected. However, users have sầu reported that despite these conditions being fulfilled, they get the following error upon trying lớn access the shared driver:

Error code: 0x80070035. The network path was not found

*
The cause is basically with the Firewall or anti-virus program, but we will troubleshoot every possibility in this guide. Proceed with the solutions as follows:Verify that the drive is sharedPing IP address of the targeted computerModify the Network Security settingsDisable the anti-virut và Windows Defender Firewall temporarilyReinstall Network Adapter driversEnable NetBIOS over TCP/IPhường.Before you beging, cliông xã on the Diagnose button on the error message dialog box & see if that helps. If not, then you may proceed.

You watching: Fix windows 10 error code 0x80070035 the network path was not found

1> Verify that the drive sầu is sharedBefore proceeding towards changing any of the settings, we could verify that the drive is shared.

Right-click on the folder & select Properties. In the Sharing tab, check the status of Network File và Folder Sharing. If the status is Not Shared, select Share.

*
Select the intended Network User for sharing the file, and then select the permission cấp độ for the user.
*
Cliông chồng on Apply and then OK khổng lồ save sầu the settings.The intended user should be able khổng lồ access the shared file/folder now.2> Ping IPhường address of the targeted computerIt might be possible that while the file/folder is shared correctly, the network channel isn’t connected right. We could kiểm tra it by pinging the IPhường address of the target computer from the primary computer.Press Win + R to open the Run window on the target computer và type the commvà cmd & hit Enter lớn open the Comm& Prompt window.Type the comm& ipconfig/all và hit Enter. It would populate a bunch of information.lưu ý the value of the IPv4 address.
*
Now, open Comm& Prompt on the primary computer.Type ping and press Enter.Cheông xã if you get 4 confirmation replies or not.
*
If not, you could try running the Network Adapter troubleshooter. Go khổng lồ Start > Settings > Updates and Security > Troubleshoot and select the Network Adapter Troubleshooter. Restart the system after running the same.
*
You could also verify if the network discovery is enabled. Go to lớn Start > Settings > Network & Internet.
Click on Change connection properties.
*
Shift the radio button for Network protệp tin lớn Private.
*
Check if the folder sharing works now.

See more: Hướng Dẫn Nhập Code Quyền Vương Chiến Mới Nhất, Hướng Dẫn Nhập Code

3> Modify the Network Security settingsAt times, the Network Security settings interfere with the file/thư mục sharing process. It could be resolved as follows:Press Win + R to lớn open the Run window and type the commvà secpol.msc. Press Enter khổng lồ open the Local Security Policy manager window.Navigate khổng lồ Local Policies > Security Options in the left -pane.Double-clichồng on Network security: LAN Manager authentication cấp độ in the right-pane to open its properties.
*
Form the drop-down thực đơn, select Skết thúc LM và NTLM-use NTLMv2 session security if negotiated.
*
Select Apply and OK to save sầu the settings.Restart the system.4> Disable the anti-virut & Windows Defender Firewall temporarilyWhile the anti-vi khuẩn & Windows Defender Firewall protect the system, at times they misjudge the threats và bloông xã functionality useful for the system. This might be the case here. Thus, you could disable the anti-virus in the system and the Windows Defender Firewall temporarily lớn isolate this possibility.5> Reinstall Network Adapter driversOutdated drivers could be one of the reasons behind the issue. You could consider updating the Network Adapter drivers as follows:Press Win + R lớn open the Run window and type the comm& devmgmt.msc. Press Enter to open the Device Manager window.Locate the Network Adapter drivers và exp& the các mục.
*
Right-clichồng on each driver individually and choose Update Driver to update the drivers.Restart the system once done.6> Enable NetBIOS over TCP/IPPress Win + R to lớn open the Run window và type the command ncpage authority.cpl. Press Enter to open the Network Connections window.Right-click on your network và select Properties.
*
Double-cliông xã on Internet Protocol Version 4.
*
Cliông xã on Advanced.
*
In the WINS tab, shift the radio button khổng lồ Enable NetBIOS over TCP/IP..
*
Clichồng on OK to lớn save sầu the settings and restart the system.

See more: Cách Nhập Code Kof All Star, Cách Nhận Và Nhập, Code Quyền Vương Chiến Kof Allstar Vng Mới Nhất

Hope it helps!

*

Fix The application was unable khổng lồ start correctly errors on Windows computers

*

An error occurred while trying to lớn configure this machine as a Domain Controller

*

Fix iTunes Error Code 5105, Your request cannot be processed in in Windows 11/10


*

Karan Khanna is a passionate Windows user who loves troubleshooting Windows 11/10 problems in specific & writing about Microsoft technologies in general.
*
July 18, 2021

Google reading nội dung of files uploaded to lớn Google Drive?

July 17, 2021

Edge introduces 8-week Extended Stable release cycle for enterprises


Lathử nghiệm Reviews

July 19, 2021

macOS vs. Windows: Which OS is More Secure?

July 8, 2021

Wondertóm tắt Document Cloud nhận xét – Cloud-based Document Management Service



Chuyên mục: giftcode