Partron pbh

Related Documents
External photosExternal Photos
Internal photosInternal Photos
User manualUsers Manual
LabelID Label/Location Info



You watching: Partron pbh

*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

PBH-400User Manual* Please refer to the manual at www.croise.co.kr for more informationCE Compliance InformationPartron Công nghệ Bluetooth Headmix, hereby declares that this PBH-400 is in compliance with the essentialRequirements & other relevant provisions of Directive sầu 1999/5/EC.The following information shall also be included in the case of radio equipment intentionallyemitting radio waves : (a) frequency Band(s) : 2.4GHz ISM Band(2.402GHz ~ 2.480GHz);(b) maximum radio-frequency power transmitted in the frequency band(s) : Max. 4dBmFCC Compliance InformationFCC ID : 2AD5K-PBH400This device complies with part 15 of FCC Rules. Operation is subject to the following twoconditions : This device may not cause harmful interference, & this device must accept anyinterference received, including interference that may cause undesired operation.FCC Part 15.21 Any changes or modifications (including the antennas) lớn this device that are notexpressly approved by the manufacturer may void the user's authority to lớn operate the equipment.FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposurelimits set forth for an uncontrolled environment. This device and its antenna must not be colocated or operating in conjunction with any other antenna or transmitter.Information to the user :NOTE : This equipment has been tested & found khổng lồ comply with limits for a Class B digitaldevice,pursuant khổng lồ part 15 of the FCC Rules. These limits are designed lớn provide reasonable protectionagainst harmfulinterference in a residential installation. This equipment generates, use and can radiate radiofrequency energy &,if not installed and used in accordance with the instructions, may cause harmful interference toradio communications.However there is no guarantee that interference will not occur in a particular installation,If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on.the user is encouraged khổng lồ try the correct interference by one or more of the following measures :- Reorient or relocate the receiving antenmãng cầu. - Increase the separation between the equipment và receiver.- Connect the equipment into an outlet on a circuit different from that khổng lồ which the receiver isconnected.- Consult the dealer or an experienced radio/TV technician for help.CAUTION TO USER : Changes or modifications not expressly approved by the các buổi tiệc nhỏ reasonable forcompliance could void the user’s authority to lớn operate the equipment.Package ContentsPBH-400 User ManualPackage ContentsDescription of PartsInstallation of Cable ClipProduct Specifications & FeaturesHow to usePower on/offChargingPairingCallingTransferring a CallVolume ControlMusic PlayMulti-ConnectionUsing Croise.R Reader ApplicationButton Functions và Status InformationPrecautionsProduct Warranty and ServiceLimited WarrantyProduct Warranty Certificate/ Package Contents /※ The components of above package are subject lớn change without notice khổng lồ improve theproduct performance or quality. Earbud Covers (Large / Small)User ManualPBH-400/ Description of Parts /Volume UpLEDPlay / PauseMicro USBCallVolume DownMic 1※ The length of cable from the headset toàn thân to lớn a user's ear can be easily adjusted throughusing the clip./ Product Specifications & features /Standby TimeStandby Time350 hours Operating Time (Music)8 hoursOperating Time(Talk)8 hoursCharging Time2 hoursBatteryLithium Polymer Battery 3.7V (125mAh)Working Distance10mSupported profilesHFP / HSPhường / A2DPhường / AVRCPDecoderSBC, APT-XBluetooth không dây VersionVersion 4.1Power nguồn Consumption0.5W※ Above sầu operating time subject lớn change based upon connected devices orthe surrounding environment./ How lớn use /1. nguồn On / Offnguồn On- Press the button for 1 second- The red + blue LED light flashes for 0.5 second and Power nguồn is turned on with voice guide.Power nguồn Off- Press the button for 3 seconds- The red + xanh LED light flashes for 0.5 second và nguồn is turned off with voice guide.2. Battery ChargingLED indicator- When the charger is connected, the Red LED is on.- When charging is completed, the Blue LED is on.※ When the charger is connected, the headphối will be disconnected from the device.※ The power turns off when USB charger is disconnected.Recommendations- Using USB Hub may take extra charging time due to the low current.For Fast charging, please use the 5V 500mA ~ 5V 1A rated charger. ※ It takes approximately 2 hours lớn have it fully charged when battery exhausted3. Battery Status Alarm và Alert- Press hotline and Volume + button at the same time for a second for audioguidance for the current battery level.“Battery Full” / “Battery Half” / “Battery not enough”4. Low Battery Alarm và Alert- The red LED light flashes 3 times with voice guidance “Battery not enough” if the batteryis less than 1 hour use.5. Critical Battery- The notice continues every 2 minutes if the battery is less than 10 minutes use andpower is turned off with voice guidance “Battery Empty” at the critical battery.6. PairingBefore using the headphối for the first time, you must pair it with a Bluetooth-enabled Device.* Pairing : Connect between Bluetooth-enabled Device và Headphối.- Press the gọi button for 1 second lớn turn on the device- After power on, the headset will automatically enter to pairing mode.(The red/xanh LED light flashes)- The headphối will automatically enter to lớn waiting mode if it is not connected for 3 minutes.(The power is automatically after 50 minutes with waiting mode)- On the device you want lớn have sầu paired, find the Công nghệ Bluetooth menu & search & select“PBH-400” from the menu of devices.- If connected without any problem, the headset will be paired with audio guide “Connected”- Once pairing is complete, it will be paired automatically afterwards.※ Manual Pairing- Hold Điện thoại tư vấn button for 2 second while placing power slide switch khổng lồ ON then it will enter toPairing mode with voice guide “Start pairing”. And Register the PBH-400 in above sầu same way. - If PIN code is required, please input “0000”.Clearing Paired Device- Hold gọi button for 1 second and Volume button while placing power slideswitch to ON then paired device will be cleared with voice guide “ Clear Paired List”and enter lớn Pairing Mode.7. CallingVoice Dial- Briefly press gọi button lớn activate Voice Dial.※ To use Voice Dialing, your sản phẩm điện thoại phone must support Voice Dialing.8. Call Answer / Gọi End / call RejectHotline Answer / Điện thoại tư vấn End- Briefly press Điện thoại tư vấn button to lớn answer the incoming Call.- Briefly press call button khổng lồ over the Gọi.Call Reject- Briefly press Hotline button to lớn reject the incoming Call.9.

See more: Https://Get - Hướng Dẫn Cách Nhập Key Office 2013



See more: #Top1 : Code Mu Huyền Thoại Vip 2021, Cách Nhận Và Nhập Code Game Mu Kỳ Tích Funtap

điện thoại tư vấn Transfer- During the Call, press call button for 1 second, audio will be transferred from headset tothiết bị di động phone.- And press Gọi button for 1 second again, audio will be transferred from Mobile phoneto lớn headmix.10. Setting Waiting Mode while CallingSetting Waiting mode- During the Hotline, briefly press gọi button twice & enter lớn Điện thoại tư vấn waiting mode.Pressing điện thoại tư vấn button twice again bachồng khổng lồ the hotline mode.※ To use Call waiting mode, the Mobile phone must tư vấn ‘Gọi waiting’ service.Incoming second Call while calling- Briefly press gọi button to lớn over the original hotline and answer the second Hotline. - Briefly press hotline button twice to lớn answer the second Điện thoại tư vấn without hanging up theoriginal Hotline (Original điện thoại tư vấn will be điện thoại tư vấn waiting mode)Ending a Call- Briefly press Điện thoại tư vấn button.11. Volume ControlVolume Up- While calling or listening the music, briefly press Volume + button.Volume Down- While calling or listening the music, briefly press Volume - button.Mute- During the Gọi, press Volume +, - button at the same time for mute.- Press Volume +, - button at the same time again to cancel the mute.12. MusicMusic Play / Music Pause- To play a tuy vậy or pause playbachồng, press Play/Pause button.Music Stop- Press Play / Pause button for 1second.※ User can hear the long beep at maximum và minimum volume.Skip Backward- It goes back khổng lồ previous music if press the Volume - button for 1 second during playSkip Forward- It goes to lớn the next music if press the Volume + button for 1 second during playRewind- It rewinds if press the Volume - button for 3 second during playFast Forward- It forwards if press the Volume + button for 3 second during play13. Language set-up change Language set-up will be changed if press the Volume + & Volume – together for 3 seconds.Sequence : Korean → English → Chinese → Japanese14. Advanced Multi-ConnectionMulti-connection is useful to link more than a điện thoại device.Pairing- Proceed pairing of the first device manually.- nguồn off the headset upon registration of the first device is completed.- nguồn on holding the hotline button for pairing mode.- Pairing 2nd device for registration.- Connecting 1st device lớn the headphối.Calling- Ring tone sounds when the second device has incoming Gọi while you are talkingthrough first device.- You can operate the same as "Setting Waiting Mode while Calling".Listening Music- In multi-pairing mode, key control is available for the first played device.- Press Play/Pause button briefly lớn stop playbaông chồng from the first device.Then key control is available for 2nd Device.15. Auto lớn ReconnectAutomatic connection when headmix is turned on- If it kept the information of previously paired device, it will be automatically connectedwhen headphối is turned on.※ If it failed automatic connection, briefly press Điện thoại tư vấn button once to lớn connect.Out Of Range- If a connected device is more than 10m away from the device,voice guides "Disconnected" with the vibration.- The notice continues every 30 seconds for three minutes & it automatically connectsif the device is placed in a connection range. 16. Usage of Croise.R (PBH-400) Reader applicationAdditional function is available such as change of headphối manner mode, Volume thiết đặt,Message read set-up, Remote shoots, etc after set-up the Croise.R Reader app.Please download phầm mềm. in google play store by typing croise or PBH-400.* It is available only for the app android (Device of higher than 4.3 version is available)17. Button function & status informationFunctionActionStatusnguồn ONPress the gọi button for 1 secondPower nguồn OFFPress the Hotline button for 3 secondsVoice : Turn onLED : Red and Blue LED blinks at thesame timefor 0.5 second và then offVolume UpBriefly press the volume + buttonVolume DownBriefly press the volume - buttonAnswer CallBriefly press the Hotline buttonReject CallPress the gọi button for 1 second & take offGọi CancelBriefly press the call button during the callMutePress the volume +, volume – shortly at the same timeTransferring a callPress the gọi button for 1 secondđiện thoại tư vấn WaitingVoice Dial※ 12 cấp độ of VolumeLED InformationReceiving a callBlue LED lights flashesslowlyDialing a callBlue LED light flashestwice inevery 5 secRed LED light flashesonce in every 3 secevery 3 secBlue LED light flashesDuring the callStandbyDisconnectionPress the Hotline button quickly twice during the callPress the button for 1 second và take offFunctionActionConnection todi động PhoneBriefly press the gọi button onconnection standby statusPairing ModePress the Hotline button for 3 secondsin off modeStatusRed, Blue LED lights flash in turnPairing relatedvoice information : Battery StatuscheckPress the hotline button & volume buttonat the same time for 1 second.Music Play / PauseBriefly Press Play/Pause buttonMusic StopPress Play/Pause button for 1 secondduring the playFunctionSkip BackwardSkip ForwardFast ForwardRewindActionConnectedConnectedDisconnectedDisconnectedLink LossOut of RangePairingStart paringConnectioninformationdeleteClear Paired ListBattery Status NoticeDangerRed, Blue LED flash"Battery Empty."Insufficient Red LED flickers 3times quickly"Battery not enough"NormalSufficient“Batter Half”“Battery Full”StatusPress the volume – button for 1 secondand take off during playing the musicPress the volume + button for 1 second& take off during playing the musicPress the volume + button for 3 secondsvà take off during playing the musicPress the volume - button for 3 seconds& take off during playing the musicLanguageset-up changePress the volume + and volume –at the same time for 3 seconds.Sequence : Korean → English → Chinese →JapaneseVoice : Korean → English → Chinese → JapaneseDelete connectioninformationPress the Điện thoại tư vấn button, volume –buttonfor 1 second at the same timein power off mode or standbyEnter pairing mode after deletingconnection information. Start ChargingConnect the cable for the rechargeCharging CompleteRed LED is onBlue LED is onLED flashes when cable is removed (Power off)/ Precautions /• Do not disassemble or modify. It may cause fire và disorder.• Do not use or place the sản phẩm at high or low temperature.• Do not place the sản phẩm near the high humidity, volatile, or flammables.• Please be cautious not to shochồng on the hàng hóa.• It might give sầu negative effect on the ear hearing if used for a long time in high volume.• This bluetooth device might be damaged if either over 1A/1000mA of charger or thedefective sầu charger is used.• In the case using oto charger, the high output from truck may affect lớn the device.Also please have the device disconnected from the cigar jack charger which may affect tothe device when starting the oto engine./ Product Warranty and Service /• This device passed strict chất lượng management and inspection process.• Warranty period is 1 year.• Even in the warranty period, you can be charged for the paid service if needed.• Product dimension và outer appearance might be changed for the unique improvementwithout advance notice.• This device cannot be used for the human rescue related service as it have the interference./ Guide for the Paid Service /• After Product Warranty Period (1 year/6 months for the battery)• User's negligence or any failure from improper disassemble, repair & modification.• Failure caused by acts of God such as fire and flood.• Failure using other options which is not provided from Partron.• This Warranty does not cover product failures due lớn improper repair installations, modifications or service performed by a non-authorized person.• Any Consumable parts./ Product Warranty /•The warranty is valid only if the original receipt issued khổng lồ the original purchaser by the dealer.•If the product label is removed, physical change of the product or unapproved repair by the 3rdperson, will invalidate of the warranty.•The consumables, such as ear cap, battery và other accessories, which have limited life, will beexcluded from the sản phẩm warranty.•This Warranty vì not cover for the damage và accident by the misuse.•This Warranty vì not cover the lost và damage of the product on either transportation ordelivery./ Product Warranty Card /Product NamePurchased DatePurchased PlaceModel No.Warranty PeriodMonthDayYearPBH-400Within 1 year from the purchased date(Battery Warranty period is 6 months)1. Model Name : Neông xã B& Bluetooth Headset2. Part Number: PBH-4003. Manufacturer : PARTRON Co., Ltd.4. Country of Origin : Republic of Korea5. Address : 22, Samsung 1-ro 2-gil, Hwaseong,Gyeonggi 445-170, Korea- Please take the time to follow the instructions in this owner’s guide carefully.- Appearance & specifications of this sản phẩm are subject khổng lồ change without prior notice forproductimprovement.* This device cannot be used for the human rescue related service because of the possibility ofbeing interfered.

Chuyên mục: Download